USB Type-C DFP Current-Limited Load Switch with FRS
-
VIN from 4.0V to 5.5V
-
30V VBUS tolerance & 35mΩ Rdson
-
All-time Reverse Current Protection (RCP)
-
Ultra-fast RCP recovery: 12us (Typical)
-
Programmable current limit from 400mA to 3.3A
-
Output current is regulated for overload condition
-
Supports Fast Role Swap (FRS)
-
Over Temperature Protection
-
Output Over Voltage Protection
-
VBUS 8kV for IEC61000-4-2 contact discharge
-
30V VBUS tolerance
-
VBUS 80V surge protection (CPS5016 version)
-
WLCSP-16L, 2.05mm x 2.05mm, -40˚C to 85˚C
-
Notebook, Smart Phone, Tablet

CPS5002
USB Type-C CC and High-Speed Digital Port Protector
-
USB Type-C Port Protection
-
0~5.5V DC Operating Voltage on CCx Port
-
24V DC Protection on CCx Port and HSDx Port
-
CC1/CC2 Over Voltage Protection FETs 600mA capable for passing VCONN Power
-
CCx Dead Battery Support (SINK Support when No Power Applied)
-
VDD operation: 2.7V ~ 5.5V
-
Rdson: Typical 0.3Ω@CCx, 4.5Ω@HSDx
-
Wide -3dB BW: 25MHz@CCx, 1GHz@HSDx
-
CCx Over Voltage Protection: Typical=5.65V
-
HSDx Over Voltage Protection: Typical=4.4V
-
Over Thermal Protection
-
QFN-14L, 2 x 2mm
-
Notebook, Smart Phone, Tablet

CPS5003
USB Type-C CC and High-Speed Digital Port Protector
-
24V-DC Tolerant
-
CC1/CC2 IEC 61000-4-2 ESD Protection: 8kV contact
-
CC1/CC2 Over Voltage Protection FETs 600mA capable for passing VCONN Power
-
CCx Dead Battery Support (SINK Support when No Power Applied)
-
VDD operation: 2.7V ~ 5.5V
-
24V VDC Port Protection on CCx
-
Rdson: Typical 0.3Ω@CCx
-
Over Voltage Protection threshold: Typical=5.65V
-
Over Thermal Protection
-
WLCSP-9L, 1.2 x 1.2mm
-
Notebook, Smart Phone, Tablet

CPS8800
USB Type-C 1.3 Protocol Compatible CC Logic Flappable Adaptor
-
Channel identification of USB Type-C connector
-
Auto detection of different power roles
-
Supports SRC/SNK/DRP power mode
-
Supports DRP with Try.SNK or Try.SRC
-
Both GPIO mode and I2C controllable
-
EOS/Surge/DC 21 V protection on CCx/VBUSD pin
-
ESD HBM: 4kV
-
Small package: QFN1616-12L (1.6 * 1.6 mm)
-
Notebook, Smart Phone, Tablet

CPS8805
USB Type-C 1.2 Protocol Compatible CC Logic Flappable Adaptor w/i VCONN
-
Channel identification of USB Type-C connector
-
Auto detection of different power roles
-
Supports SRC/SNK/DRP power mode
-
Supports DRP with Try.SNK or Try.SRC
-
Supports Vconn for active cable
-
EOS/Surge/DC 25 V protection on CCx/VBUSD pin
-
Supports Vconn for active cable
-
ESD HBM: 3.5 kV
-
Small package: QFN1616-12L (1.6 * 1.6 mm)
-
Notebook, Smart Phone, Tablet

CPS8820
Electronic Marker for USB Type-C Passive Cable
-
Type C 1.3 Standard and USB PD3.0 Compliant
-
Integrated Ra resistors / ISO Diodes
-
Adaptive engine of BMC receiver
-
Embedded MTP for customized data (>800 times)
-
Wide single power supply range: 2.7 to 5.5V
-
DC tolerance on connection pins over 33V
-
In-Cable/I2C MTP programming
-
Lowest BOM Cost Solution
-
Small Package, DFN2020-8L for Compact Cable Plugs
-
Patented Adaptive Receiver Engine for Robust Single-Wire Communication
-
Passive USB Type-C Cables

CPS5007
USB Type C High Voltage Power Switch for SNK side
-
30V tolerance on both VIN and VBUS
-
30mΩ Rdson
-
All-time RCP (Reverse Current Protection)
-
Adjustable VBUS (Over Voltage Protection)
-
Built-in slew rate control for inrush current limit
-
RCP turn on time is 2us typ
-
RCP trigger voltage is 20mV typ
-
Over Temperature Protection
-
Output Over Voltage Protection
-
Under Voltage Lockout
-
Reverse Current Protection
-
IEC61000-4-5 protection for 100V Voltage with 1uF
-
WLCSP-15, 2.56 x1.54 x0.555 mm
-
Notebook, Smart Phone, Tablet

CPS5008
USB Type-C SRC Controller with Current Limit Power Switch
-
USB Type-C Rev. 1.3 Compliant SRC Controller
-
SNK Attach/Detach Detection
-
Super speed line polarity determination
-
Default/1.5A/3A Current Capability Advertisement
-
VBUS supply control and discharge
-
VCONN supply to active cable and discharge
-
Audio and Debug accessory identification
-
44mΩ High-Side MOSFET
-
DC 28V absolute ratings at VOUT/CC1/CC2
-
1.7A/3.4A current limit
-
Output Reverse Voltage/Over Current Protection
-
CC pins short to ground protection
-
Fast over current response 1.5us (typ.)
-
Port power management control
-
QFN20L, 3.00 x 4.00mm
-
Notebook, Smart Phone, Tablet

CPS5505
CC/SBU OVP and IEC ESD/ High Voltage Surge Protection
-
USB Type-C Port Protection
-
24V DC tolerant on CCx Port and HSDx Port
-
CC1/CC2 OVP and FETs 600mA capable for passing VCONN Power
-
CCx Dead Battery Support (SNK mode Support)
-
VDD operation: 2.7V ~ 5.5V
-
Rdson: Typical 0.3Ω@CCx, 4.5Ω@HSDx
-
Wide -3dB BW: 25MHz@CCx, 500MHz@HSDx
-
CCx Over Voltage Protection: Typical=5.65V
-
HSDx Over Voltage Protection: Typical=4.4V
-
OVP response time on CC/HSD:80~100ns
-
CCx short to Vbus tolerate max voltage to 24V
-
IEC61000-4-2 ESD protection on CC and HSDx channel
-
Surge ±40V on CC channel and HSDx channel
-
Over Thermal Protection
-
QFN-20, 3 x 3mm
-
Notebook, Smart Phone, Tablet

CPS8610
2:1 MIPI D-PHY (2.5Gbps) 4-Data Lane & C-PHY(2.5Gsps) 3-Data Lane Switch
-
VCC Operation: 1.6 to 5.0 V
-
Input signals range from 0 to 1.3 V
-
RON: 7Ω Typical LP & HS MIPI
-
ΔRON: 0.2Ω Typical LP & HS MIPI
-
RON_FLAT: 0.9 Ω Typical LP & HS MIPI
-
lCCZ: 1 μA Maximum
-
ICC: 35 μA Maximum / 18 μA Typical
-
OIRR: -20 dB Typical
-
Xtalk: -30 dB Typical
-
WLCSP-36L, 2.39mm X 2.39mm
-
Notebook, Smart Phone, Tablet

CPS8604
USB3.1 Gen2 10Gbps Qual Channels Linear Re-driver
-
Single 3.3V ±10% power supply
-
10Gbps serial link with linear equalizer and driver
-
USB 3.1 Gen2 compatible
-
Four 10Gbps differential signal pairs (dual-port)
-
Linear range up to 1200 mVPP
-
Pin adjustable receiver equalization
-
Pin adjustable flat gain
-
100Ω differential CML I/Os
-
Automatic receiver detect
-
Automatic “Slumber” mode for adaptive power management
-
Support on-line I2C debug
-
TQFN-42L, 3.5mm x 9mm, -40˚C to +85˚C
-
Notebook, Smart Phone, Tablet, Digital TVs
